RS2 Brake lines

[martinjs]

The thread is M10x1mm i beleive, and i think for the front pipe your on about you need female fittings both ends, double check that though.

[Billman]

I need for starters this one:

http://www.tots.ch/rs2/rs2/tuning/bilderbremsen/34.htm

I think the RS2 has 2 lines at the front and 4 at the back!

[martinjs]

Yeah thats it, the lengths are on Etka, i had mine made up, and just added 10mm or so to the lengths, coupe just has 2 at the rear though.

[Billman]

i know the length! The problem are the fittings!

[Jas11n]

The fittings are as Martin says, M10x1mm.
A female M10 into the line at the strut tower, and a male M10 into the caliper.

Female M10;



Male M10

[Billman]

That what i want is not for the exsactly for the calipers but more in th eway up! Look at the link i posted!

You mean in the caliper direction dont you??

[Jas11n]

The fittings are as Martin says, M10x1mm.
A female M10 into the line at the strut tower

As I said above, A female M10x1mm into the hardline from the strut tower!

[Billman]

Thanks Jas! Waiting for an answer of someone and if it's not going to work then i am going this route!

Thans alot, all of you!

[GlynRS2]

VAG Parts keep the Goodridge hoses in stock. Martyn commissioned Goodridge to make these, supplying them with new OE RS2 hoses to ensure an exact fit. The Goodridge hoses are all stainless and have been TUV approved. I have these and they are a top quality product.

[Billman]

@Glyn
How much did you paid for them???

@Jas

Is there any Inner Imbus or something like that on the hoses?

[Jas11n]

@Jas

Is there any Inner Imbus or something like that on the hoses?

Don't quiet understand what you mean
The brakeline I used is a teflon inner pipe, with a stainless steel overbraid and then a clear plastic sleeve covering that.
Hope this is what you meant.

Jas

[Billman]

not exsactly but its ok! I have have the info that i wanted!

Thanks for your help!