v6 rear discs and pads fittting.

[jules2.8e]

hi guys,
Iwas just wondering how easy it is for this job to be done by myself.
Im know f1 mechanic but im not to bad with a spanner, as i want to get my hab=nds dirty and the rear discs are absolutley shot .
Any tips or advice would be great thanks in advance.....jules

[Corey]

If you can figure out how to take the wheel off then the rest will be a breeze. The only thing that may stump you is you must wind the piston back in on the rear not push it.

[jules2.8e]

So where i used to get a pair of mole grips and squeese the rear piston in on my 200sx,so i could get the the piston over the disc with the pads attached.You are saying that there is a nut/allen key attachment that i have to use to retract the piston in .....cheers ..... jules

[Mikes2]

http://www.s2-audi.co.uk/tech_articles/rear_pads.htm

may help

[jules2.8e]

thanks mike