996 bleed nipple dust covers

[Rusty]

Looking for a supplier of bleed nipple dust covers for the 996 monoblocks. Any ideas? Had a look around with no joy. The old ones are a little tired.

Going to replace all 4 bleed nipples before putting them back on the car. They are for an M10x1.0mm thread, as per the brake line union. Have found several suppliers but none do the dust covers (on their websites anyway). Going to wait and see if I can find the dust covers to finish the job off properly.

Cheers in adavance.

[Fat Audi 80]

P O R S C H E ?

[terrybullwon]

Yeah, porsche dealers.
Its a service kit iirc about £17.00???

[Rusty]

P O R S C H E ?

Leave me alone! I decided to fix stuff that wasn't broken before I started to fix it and now it sort of is!

Cheers for the (quite obvious) advice! Don't usually deal with Stealers as they have a habit of being a bit useless (apart from Ben of course!).

[Fat Audi 80]

We feel your pain Andy! (But like to have a dig anyway)

Cheers,

Steve.

[4WheelDrifter]

I've got stainless bleed screw and rubbers in stock, if you're interested?

[AndyP]

Try your local brake factor, the bleed nipples are a std part so a dust cover should be no different. No need to pay Porsche prices, ask me how I know this

[Rusty]

I've got stainless bleed screw and rubbers in stock, if you're interested?

Cheers Stu. 4 off of each please.

[BRY]

8A0615273 is the RS2 bleed nipple kit (pair)
So you can still get them off Ben if you want

[Rusty]

Cheers BRY.