Help needed indentifying disc

[Matt_D]

Hopefully somebody could help me indentify these discs

The previous owner said that they are Audi TT/S3 calipers and URS6 discs, he was right about the calipers as i have compared them to photos of my old brake setup on my Fabia VRS.

The discs are cracked badly and need changing, they are 312mm diameter and 30mm wide but have no part number on them.
According to S-cars.org the URS6/4 have 10.9in/276mm discs so it can't be them
They are not Audi TT/S3 discs due to the holes in the mounting face, sooo can anybody shed some light pretty please with cherries on top?



Note holes on the mounting face of the disc and slot on top of the disc just left to the tape measure

[CHEN]

Some of the late UR S6 had 314/30mm discs could it be those? Audi part no. 441 615 301 AA

[Corey]

S-cars is correct for the USA, they didn't get the HP2 brakes, theirs were only G60's.
The discs for the urS6 are (as Chen says) 314x30.

[Matt_D]

Ahh i see it could possibly be those then many thanks chaps, i'll try and find a piccy somewhere to compare, 314mm brakes on my S2 eh?

[Corey]

314mm brakes on my S2 eh?

Nothing new, S2's have been having upgraded brakes since the beginning of time.
They normally go the Porsche route.