Hi S2/RS2 enthusiasts, maybe the question has already been answered:
I have bought a set of mismatched Porsche 993 brake calipers to replace the wrong ones on my RS2.
20231125_095627.jpg
But they are in such bad condition that they will need a thorough overhaul, I mean :
Complete disassembly, sand blasting, glass bead peening, anodyzing, painting and reassembly with new consumable parts.
Capture d’écran 2023-11-27 161149.jpg
I know the manual recommends no doing this, but my calipers are so corroded that they require a complete disassembly to remove the rust.
I am skilled and tooled to carry out such heavy and sensitive work but I lack some technical data to do it properly.
Can someone share with me :
- The tightening value of the 4 large bolts (probably 4 x M12 on fronts and 2 x M12 + 2 x M10 on rear calipers) that hold the two halves of each caliper together (yellow arrows)?
s-l1601.jpg s-l1602.jpg
- The tightening value of the 4 small bolts that hold the brake pads supports inside the calipers (blue arrow)?
20231017_2330052.jpg
I assume they are all installed with red Loctite locking compound.
The best reply would be to share an original Brembo factory assembly sheet showing this information.
Thank you for your help.
I have bought a set of mismatched Porsche 993 brake calipers to replace the wrong ones on my RS2.
20231125_095627.jpg
But they are in such bad condition that they will need a thorough overhaul, I mean :
Complete disassembly, sand blasting, glass bead peening, anodyzing, painting and reassembly with new consumable parts.
Capture d’écran 2023-11-27 161149.jpg
I know the manual recommends no doing this, but my calipers are so corroded that they require a complete disassembly to remove the rust.
I am skilled and tooled to carry out such heavy and sensitive work but I lack some technical data to do it properly.
Can someone share with me :
- The tightening value of the 4 large bolts (probably 4 x M12 on fronts and 2 x M12 + 2 x M10 on rear calipers) that hold the two halves of each caliper together (yellow arrows)?
s-l1601.jpg s-l1602.jpg
- The tightening value of the 4 small bolts that hold the brake pads supports inside the calipers (blue arrow)?
20231017_2330052.jpg
I assume they are all installed with red Loctite locking compound.
The best reply would be to share an original Brembo factory assembly sheet showing this information.
Thank you for your help.
Comment