Pics of machined SEAT carriers for 314x30 rotors?

[RS80]

Thanks!

Cheers
Chris

[Jas11n]

[RS80]

Great!
What calipers (part numbers) do they accommodate?

thanks!

Cheers
Chris

[Jas11n]

Part numbers? don't know those, user "Bry" is the man for part numbers.
The four pot brembos I have fitted to those came from a Porsche 996 carrera 2/Boxster S fronts
Mounting hole centres are 130mm for the caliper.

Others may know part numbers.

[hybridavant]

jas11n can you advise on amount has to be machined from seat brackets and where to fit the porsche callipers ?
I take it these are from leon cupra R?.


Cheers

[Crawford_S2]

p/n for caliper brackets from seat are 6KL 615 421 not sided.

Think p/n for calipers are:
996.351.425 (left one) and 996.351.426 (right one)

I also bought 4x N100.880.03, 4x N100.650.02, these are caliper bolts. And RS2 brakelines!

[RS80]

GREAT FORUM - OUTSTANDING MEMBERS KNOWLEDGE

Keen on advice for machining.

Cheers
Chris

[Crawford_S2]

Not sure about machining specs as you are using smaller rotors than i did, Bry is probably the man to PM as previously mentioned.

[Jas11n]

Another post I missed

I took off 8mm from the "caliper to bracket" mounting face. 4mm from the "bracket to strut" mounting face.
This was to use the Audi A8 314mm x 30mm disc.

Different disc size will require a different amount taken from the caliper to bracket mounting face.

Jas..

[Jas11n]

I take it these are from leon cupra R?.


Cheers

Seat Ibiza Cupra R