Urgent Rs2 Brake Question

[andyg plym]

Hi everyone, after searching for ages im in a right pickle as to what discs and bolts i need to do my big red conversion today. Im buying the the rs2 callipers,textar pads,stainless hoses and brackets from my mate. They are brand new so as you'd imagine very expensive.
I want the cheapest discs (GSF) but the forum gives 2 sizes (314 and 330MM),
and also what bolts do I need? Bearing in mind the audi dealers arent open today!
Can I sauce my own bolts or does it need to be a specific one?
Any help much appreciated

[andyg plym]

re

bought them and now need to get the right discs and calliper bolts, any ideas anyone?

[andyg plym]

re

cheers chappy, now ive found the part number for the callipers:20.5249.00. Im pretty sure they are the big reds and not the small ones ? They look huuuuge !

[s2driveruk]

Re bolts see here:

http://www.s2forum.com/forum/showthread.php?t=15317&highlight=rs2+caliper+bolt

Lost me with the disc options, are u talking about a 314x30mm and a 330x30mm?

[s2driveruk]

if its the big reds then they are mahoosive look like these:

http://www.968uk.com/technical_tips/...igReds-640.jpg

[andyg plym]

re

i saw that when i was looking then i found a different part no: n 100 880 03
cunfused.com or what !!

[andyg plym]

re

i bought them today from s2_southwest. We both reckon they were the biggons but then I searched the forum and others said they wern't! So any ideas what size discs clever cloggs?

[s2driveruk]

lol a question on the 996 conversion i'd be fine with as i did it myself but on the Rs2 version not so hot. I think the stock version was 304x32 and the larger was 322x32 but bear in mind they will be specific to the rs2 hub config and hat height too so won't bolt up to a coupe. 5x130 v 5x112 pcd

Could be talking a loab of B**LOks here, sorry few beers floating about

Someone will be along shortly who a) knows and b) is sober

[Pembo]

From memory 304mm x 28mm. I still use these to good effect on the rally car. I do use separate bells and discs.

[s2driveruk]

was it only 28mm, seems too thin? I thought all porker brakes were like 30-32mm thickness

[andyg plym]

re

ive narrowed it down.....314mm, 323mm, or 330mm. All are 30mm wide.

[s2driveruk]

314mm is an A8 disc from 94>, 323 is the later a8 (circa 98>) and the 330x30 no idea? There is a larger 345x30 which is huuuge which is from an s8/armoured s8

HTH
David

[andyg plym]

re

so should i go for the 323mm? Do both fit? GSF charge the same on both about 42 squid

[Corey]

The 323 will fit with the stock bracket (assuming you have the RS2 bracket and not one that has been machined for a 314mm disc), the 314m disc will have a pad overhang

[andyg plym]

re

the part number on the carrier is 6sa 8a0615125 a. Im pretty certain its the rs2 one. Thanks for your help guys