brake kit

[Dan_s2_coupe]

how much would it cost to upgrade my brakes to 4pots

Does anyone have any 4 sale

[Al Wyn]

Bry, Corey or Bram

[terrybullwon]

Done mine quite cheap dan,

Porker calipers £230 USA (only done 10k)
Repair kit £22.00 (for retainers)
Pads £30ish
Discs s8 cant remeber maybe £90
Brackets i swap some kit with corey but less than a £100 from Vag IIRC
and a set of rs2 hard lines...... job done

The smile on your face priceless

[Dan_s2_coupe]

so about 450 then

Would like 2 buy the lot off someone if there is any goin

[Dan_s2_coupe]

http://cgi.ebay.com/ebaymotors/Bremb...spagenameZWDVW

is this wot i need

[S2_Dave]

Bry supplied and fitted all of my upgrade parts. I supplied the tea and the odd tool. I didn't have to wait long as I went for black Porsche calipers rather than red, which were more popular.

[Al Wyn]

How much Dave ?

[Dan_s2_coupe]

yeah how much??

[Bram]

http://cgi.ebay.com/ebaymotors/Bremb...spagenameZWDVW

is this wot i need

No. They don't fit the S8 discs!

[S2_Dave]

I can't remember exactly as it was a while ago and I paid in cash, plus I had grooved 323mm A8 discs, rather than the standard 323mm or 314mm. BRY's probably the best person to answer this one, but it was in the region of £500-£600. Well worth it IMHO.

PM BRY, I'm sure he'll be able sort everything out for you (machined Seat brackets 'n' all).

Alternatively, contact Corey (info@quattronics.co.uk) who can provide you with what you need (or go mental with a leg-bending-potential 8-pot kit). It's worth a visit to the new premises just for the roads getting there!

[s2 on the way]

make sure though you get the 323 s8's rather than the 345mm ones which I got and had to extend my rs2 bracket to clear the monster disks..

[Jamo]

make sure though you get the 323 s8's rather than the 345mm ones which I got and had to extend my rs2 bracket to clear the monster disks..

345 should be machined down to 340 to work correctly with the porsche caliper.

[europeanme]

Bry's the man!!!!....

[Acidburn]

make sure though you get the 323 s8's rather than the 345mm ones which I got and had to extend my rs2 bracket to clear the monster disks..

have you got any pictures of this all done? also what size wheel I presume 17's as IIRC it wont/might just fit's inside the standard 16's avus alloys.