A3 3.2 calipers on s2 avant? Help needed

[Big Lee M]

I have been offered a set of disc,calipers,carriers and pad off a Audi A3 3.2 V6 it's on a 05 plate. I was just woundering if anybody knows if they would fit and what size disc they use? They looked huge Any help would be greatful

[s2driveruk]

disc size is 3xx mm x 30mm i'd expect so they are pretty big. as for making them fit, it'll probably be not a simple bolt up job i doubt. You'll need to fabricate some kind of carrier and work on the offset etc which will end up getting expensive.

Personally, whack them up on ebay, make some money off them and invest in a tried an tested Porsche monoblock and A8/S8 disc setup.

HTH
David

[Big Lee M]

Cheers, think i might do that. Roughly how much should i expect to pay for the porsche set up plus they will look a lot better behind the 18's. When i get my hands on some s8 avus 18's

[s2driveruk]

£5-600 i'd think. do a search on 996 brakes and you should see plenty of info about setups and costs/parts required