Weird brake problem

[steverrquattro]

Servo was bad

Do you remove the return hose when the engine is running?

If not, do you need to pump the pedal before removing?

[Error404]

Can't remember mate this was some years ago!
I do remember I fitted a different servo and problem was solved.
I would pump the bomb until the pedal goes hard before removing the line from the bomb to the servo, or there will be residual pressure in the system.

[steverrquattro]

Can't remember mate this was some years ago!
I do remember I fitted a different servo and problem was solved.
I would pump the bomb until the pedal goes hard before removing the line from the bomb to the servo, or there will be residual pressure in the system.

Last question, which is the return pipe? Is it the one next to the pressure Switch?

[Error404]

Its the one in the top IIRC, the hose joins the PAS fluid return below the rack.

[steve briance]

Error4054 - nice customization of factory parts there!

I love seeing this kind of work - smart thinking around problems

[chezz]

Rear seat, Spam shaped unit...disconnect the electrical connector....what occurs?

[chezz]

Wheel sensors - I assume you have disturbed them during all your rennovation...eliminate these as a cause of your problems.