ABS Rings The Good News

[iain1067]

After a couple of phone calls

https://www.reluctorrings.com

These guys will make them for you send off your old one 3 day turn around cost £35.00 plus vat

https://www.driveshaftuk.com

Has them on the shelf £31.00 next day delivery


Result all i need to do now is fit it without breaking or bending it.


Iain

[S-Express]

half the price of a new joint!

anyway - good luck, BE CAREFUL!

(do you need to heat it up to fit it?)

[iain1067]

No the hole type are a gentle press fit with a dab of loctite if need be, it's only the toothed type that need to be heated up and pressed on.

Iain

[iain1067]

Just as an update, i got the ring today and fitted it, it's nice snug press fit which i carefully drifted on with a copper faced hammer, doing a little bit at a time. So far so good no boing from the abs and abs light out and all codes cleared.

Iain

[pixsaudisex2]

It would still drop even easier if you heated it up before fitting. although as you say you dont have to.

[iain1067]

i was told not too with the hole type

Iain