Goodridge braided hose part nos?

[mcandmar]

I really miss vagparts in times like this

Does anybody have part numbers for the kits they sold? I need two sets, S2 Coupe with monoblocks, i.e. x2 front, x2 rear. And an S2 Avant with stock brakes, i.e. all x6 hoses.

Thanks,

Mark.

[Fat Audi 80]

I was thinking about this the other day. I would like to add braided hoses to the front of my car (standard brakes) and don't know where to start looking for the correct kit for my car....

[Flat on my back]

Er...

Make them yourself...that's what i'm doing for some new lines on my 90?

[Henkjan]

http://www.goodridge.nl/gcat/bikecar/code/goodridge_benelux.pdf

btw: coupé has 6 hoses, 4 at the front and 2 at the rear

[mcandmar]

Thanks for the link Henkjan but that only opens up more questions

Why does the avant kit have 8 hoses?

Any whats the difference with the Porsche Caliper option? I thought they all used hard lines to the strut and should only require four lines in a kit?

@Carlos, i'm not entirely comfortable with the thought of homemade brake lines, would rather buy them made up.

Cheers,

Mark.

[Fat Audi 80]

@Carlos, i'm not entirely comfortable with the thought of homemade brake lines, would rather buy them made up.

Cheers,

Mark.

I wouldn't have a clue where to start, and therefore I agree!

[Henkjan]

Thanks for the link Henkjan but that only opens up more questions

Why does the avant kit have 8 hoses?

Any whats the difference with the Porsche Caliper option? I thought they all used hard lines to the strut and should only require four lines in a kit?

don't have a clue about the avant...

coupé, front: there are 2 hoses, one from the body to the "leg" and the other from there to the caliper. see pic. porsche cliper option is probably with a different fitting for on the caliper, the Audi one does not fit.

[europeanme]

check out the drawing with part numbers on here...

http://www.s2forum.com/forum/showthread.php?t=34519

is it worth making the info available on guides and tips..or somewhere were people can find this info easily...

[johne]

I got Goodridge to make me up a custom hose for the front as a single length. I had a standard brakes set-up with the solid link piece on the back of the strut so having a single hose enabled me to have just one run, eliminate those extra unions and for a coupe you end up only needing 4 hoses for the whole car.

John

[Henkjan]

will this one

fit any Porsche caliper, or just the 996 one? (I have a set from a Boxter laying around waiting for some time and a few parts (like a hose) to be fitted to my S2)

[mcandmar]

Spoke to Demon Tweeks about those kits, who in turn got unto Goodridge as the part numbers didnt make much sense. All the Goodridge kits they are supplied start with SAU-XXXX and not XAU as per the above catalog link. Long story short Goodridge cannot supply kits for S2 Coupe or Avant, but will make up kits if i send them samples. Apparently the Belgian site is a totally different part of Goodridge and they cannot supply those kits. What a load of ****

@Henkjan, Can you recommend any online distributors in Holland or Belgium that would be able to post them to me?

Thanks,

Mark.

[Henkjan]

when I bought mine, I purchased them direct from http://www.goodridge.nl
in case they do not sell to consumers anymore, I can recommend http://www.biesheuvel.nl/

[mcandmar]

FYI, If anybody is looking for these contact Biesheuvel via e-mail. Antoine is the guy to talk to.

All the lines have a clear protective coating and they come with copper washers for the caliper connections. I have only fitted the coupe kit so far but i can confirm they fit perfectly

Mark.

S2 Avant : XAU-12125-B - €157
S2 Coupe : XAU-15013-B - €118

[quattrostyle]

can anyone tell me if the fittings for Porsche calipers really differ from the standard Audi calipers? I want to buy goodridge brake lines for my 90 quattro type 85 which will have Porsche calipers up front.

[Henkjan]

yes they are different.