Porka callipers - disc issue - help please

[s2bug]

Have these callipers to go on

996 351 425 - 20 70 58 04

996 351 426 - 20 70 68 03

Bought A8 323 size discs which are too wide as in fat for the pads I have in?

confused?

Is this the right disc or are the pads wrong or am i just going mad... and yes the psitons are completely pressed in..

Help please

Thanks all

[Dingo]

You need to file of about 1mm off the four pegs on the callipers

[s2bug]

You need to file of about 1mm off the four pegs on the callipers

pegs?

[BRY]

The stainless pins that the pads "sit on".
Make sure that the pistons are all the way back in or you will struggle.

[s2bug]

I see ...

when you sit on ...

There are 2 plates with a spacer type thing that sits inside the piston top stop squeeking.

I can see by shaving 1mm of the bottom of each I will get a bit more clearance?

I only have 1 peg that as such holds the pads in place .. will post a pic later.

Am on the right track here?

[BRY]

If it's the pads then you haven't pushed them back far enough.

If it's the stainless pegs then you grind them.

[s2bug]

Its the pads.

They came with the disc set up I had so maybe too thick ..

The pistons are pushed all the way back!

[Smith_S2]

1mm of these pins/pegs here

HTH

John

[s2bug]

Spot on ...



Totally get it now, easy remedy with pics!

Porka`s will now go straight on easy as.

Happy days

Many thanks

J