help needed with wheel bolt length

[urS6Tom]

Does anyone know where I can get extended length wheel bolts for my 1995 urS6?

I have the S6+ wheels and am fitting some AP Racing 6-pot brakes. The brakes fit fine, but with the thickness of the rotors, the standard wheel bolts (thread length = 27mm) now don't seem quite long enough to be safe.

Would appreciate any advice on where to source longer (32 - 35mm thread length) bolts. I live in London.

Thanks,
Tom

[UrS4boy]

Does anyone know where I can get extended length wheel bolts for my 1995 urS6?

Tom: Any aftermarket parts dealer with access to H & R (the spring and spacer people) products should be able to help you. H & R has the longer bolts. Make sure you get the ones with the "ball" end rather than the conical end.

HTH

[urS6Tom]

Thanks.

By the 'ball end' do you mean a Radius Seat? I believe the conical ones are known as a Tapered Seat...

Tom

[mcandmar]

There is a guy selling them on ebay at the moment, 40mm and 50mm versions.

[UrS4boy]

Thanks. By the 'ball end' do you mean a Radius Seat? I believe the conical ones are known as a Tapered Seat...Tom

Yes. We speak all different like over here on this side of the "pond".

Wrench = spanner
Hood = bonnet
Fender = Wing
Flashlight = torch
Elevator = lift
Beer = beer !!

Yeh, Beer!!