Abs Light Wan't Go Out After Hard Braking

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • david
    S2Forum Extremist
    • Oct 2008
    • 1268
    • Country: United Kingdom

    #1

    Abs Light Wan't Go Out After Hard Braking

    ABS light stay's on and wan't go out after braking hard.does anyone have any idea why?.Can a worn pads course it to stay on all the time?
    [SIGPIC][SIGPIC]/SIGPIC]92 3B pearl white=gone back home to Germany,probably in bits and pieces

    RS2 VOLCANO BLACK] soon to be broken to bits
  • A80Avant
    S2Forum Obsessed
    • Sep 2005
    • 10873
    • Country: Greece

    #2
    do you have a diagnostic? if so you can connect to the ABS ecu and check if any of the sensors are worn.If not then it could be the brake bomb

    Comment

    • 220bhp
      S2Forum Fiend
      • Nov 2004
      • 2578
      • Home: United Kingdom

      #3
      I had this problem,it was a rear caliper that that kept sticking had to replace it in the end, problem solved after that.

      Comment

      • david
        S2Forum Extremist
        • Oct 2008
        • 1268
        • Country: United Kingdom

        #4
        abs

        Originally posted by A80Avant
        do you have a diagnostic? if so you can connect to the ABS ecu and check if any of the sensors are worn.If not then it could be the brake bomb
        no, i don't have one.but i'll check the brake bomb
        Last edited by david; 19 July 2009, 12:54.
        [SIGPIC][SIGPIC]/SIGPIC]92 3B pearl white=gone back home to Germany,probably in bits and pieces

        RS2 VOLCANO BLACK] soon to be broken to bits

        Comment

        • david
          S2Forum Extremist
          • Oct 2008
          • 1268
          • Country: United Kingdom

          #5
          abs

          Originally posted by 220bhp
          I had this problem,it was a rear caliper that that kept sticking had to replace it in the end, problem solved after that.
          i'm due a brake change all round soon,so maybe i might get that done and see if that solve's the problem
          [SIGPIC][SIGPIC]/SIGPIC]92 3B pearl white=gone back home to Germany,probably in bits and pieces

          RS2 VOLCANO BLACK] soon to be broken to bits

          Comment

          • bsavictor
            S2Forum Fanatic
            • Mar 2009
            • 55
            • Home: United Kingdom Current: Scotland

            #6
            Have had the problem in the past, pump pressure a little low, tired pump, replaced, then perfect

            Comment

            Working...