Rear brake upgrade 300x22 in original 16" wheels

[Rocco]

http://cgi.ebay.de/Audi-S2-Bremse-30...d=p3286.c0.m14


what about this set of parts?? it looks a nice upgrade may with the same discs as S4 B7 has.

Only not sure about the 1100€... , aniway with all these parts it seems Plug/play in our coupe cars...

[GazzaG60]

thats the same kit as what paul originally design and pete sells now for about 1/2 from the looks

ebay used to be about a cheap bargain. now its generally extortion.

[S2central.net]

That eBay kit shows calipers for avant/sedan - not the side pull version for coupe.

[GazzaG60]

cheers paul, i stand corrected. still gotta be pricey

[Rusty]

Correct, Pete was selling a kit recently for well under half, check out the Quattro Corner section

[GazzaG60]

so to summarise the kit is for an avant and you could have 2 for that money.

[Rocco]

yes,but Paul said me that for use these discs in the 3B 16" wheels i will have to do a 300 to 280mm discs. for do a perfect clearance in the 3B wheel.

in the ebay pictures shows a "big" disc into the rear coupe wheel,but unfortunately i can´t know if this disc it is 300x22 or was reduced to 280mm


overpriced¡¡

[GazzaG60]

300 to 280 is not a lot to notice in a picture. this is avant remember so they can get away with bigger than the coupe.

280mm is the tried and tested s2 route and 280 on the rear is ample id say. its bias controlled anyway.