rs2 ABS sensors and wheel bearings - any part compatiblity?

[a4kquattro]

Hey guys,

Does anybody know if I can use any US spec parts to interchange with RS2 ABS sensors (front and rear)? How about wheel bearings?

[Jamo]

Wheel bearings are bigger at the rear than the Coupe but the fronts are the same, they are the same as the Avant bearings though.

Ask S2avant about the sensors although I do not believe they are different.

[a4kquattro]

yep, looks like the fronts are same as US coupe quattro. Rear could cross to B4 90q. ABS sensors look like same part numbers as B4 90q as well

[saltinot]

yep, looks like the fronts are same as US coupe quattro. Rear could cross to B4 90q. ABS sensors look like same part numbers as B4 90q as well

The RS2 uses same 82mm wheel bearings at all four corners. The B4 90q has the small bearings in the rear.

The part numbers for the front and rear bearing kits are different due to the hardware that is included with the kit. The bearings are the same.

From my project thread....... Note: the part number on the box is the one you need. My writing is not the best the number is 441 407 625 A

[a4kquattro]

Thanks Tom!