boxster s rear brakes on avant ?

[keithsw0]

hi can any body tell me if any one sells a kit for rear brake upgrade for aby avant

i have rear boxster s calipers what other bits do i need to upgrade and where can i get them
thanks keith

[Jamo]

Quattro Corner used to sell them or PM S2avant for the parts from TPS

You can't use boxster calipers on the Avant rear, no handbrake, suitable for an RS2 however

Plenty information available via search

[Rocco]

i am using them with no hand brake (for the moment)

300x22 discs ,custom caliper carriers and porsche boxter S rear calipers with ferodo ds 2500 pads and in the near future hydraulic handbrake and homologation

[Jamo]

i am using them with no hand brake (for the moment)

300x22 discs ,custom caliper carriers and porsche boxter S rear calipers with ferodo ds 2500 pads and in the near future hydraulic handbrake and homologation

In the UK MOT you cannot have hydraulic handbrakes

[s2driveruk]

got any details on the custom carrier and the disc combo you are using?

[driftin jo]

Fit them then fit a some of these , only £120 for the pair.

http://www.compbrake.co.uk/CALIPERS/CALIPERS_COMPR3.html

[G60Rallye]

In the UK MOT you cannot have hydraulic handbrakes

You can but there must still be a seperate action for the handbrake.

[Jamo]

You can but there must still be a seperate action for the handbrake.

You need a work mechanical handbrake, so you have to double engineer on the avant to have a hydraulic one for assistance only.

http://www.motuk.co.uk/manual_310.htm

Hydraulic parking brakes as a sole means of operation are not acceptable on vehicles first used on or after 1 January 1968. However, they may be used to assist the application or release of a mechanical brake.

[Le S2 Audi]

Icle Birdy whispered in my ear that there may be a bracket coming for the 996 rears to bolt on to the RS2 & One is on the drawing board for an S2 Coupe!!

[Jamo]

Bruno does a bracket for the RS2, myself, Bruno and Smiler are using them at present. Be good for another option via you know who though

[Le S2 Audi]

I have also asked for a RS2 Front bracket for the GT3 Mk1 Calipers 996-351-429/430to be made!!

As I keep being asked for them...

[Jamo]

I have also asked for a RS2 Front bracket for the GT3 Mk1 Calipers 996-351-429/430to be made!!

As I keep being asked for them...

VRS / KDR do them for the 322 mm disc and the 330mm disc

I've seen the technical drawings

[Le S2 Audi]

VRS / KDR do them for the 322 mm disc and the 330mm disc

I've seen the technical drawings

The ones I have asked for will be different in desgin & will come helicoiled & with new mounting bolts...

[Jamo]

The ones I have asked for will be different in desgin & will come helicoiled & with new mounting bolts...

V.Nice

[andy10v]

Would it be possible/is there space to have a bracket that mounted the 996 rear caliper AND a small mechanical handbrake?

Rear 996 on the 300mm discs that are machined down to 280 for the normal upgrade would be rather nice.