boxster s rear brakes on avant ?

**Jamo** · 23 September 2010, 15:23

Originally posted by andy10v

Would it be possible/is there space to have a bracket that mounted the 996 rear caliper AND a small mechanical handbrake?

Rear 996 on the 300mm discs that are machined down to 280 for the normal upgrade would be rather nice.

Yeah seen it done on an S2coupe and S4's however there isn't much space so it's a matter of placement and getting a cable in

**Le S2 Audi** · 23 September 2010, 15:24

Originally posted by driftin jo

Fit them then fit a some of these , only £120 for the pair.

http://www.compbrake.co.uk/CALIPERS/...RS_COMPR3.html

I Like the look of these may have to look into how they would fit on a coupe...

The Rear brackes have nothing to do with me... I just heard about them...

**terrybullwon** · 23 September 2010, 16:45

I have boxster S calipers with a hydraulic hand brake, and no mechanical brake. But then i do not need a MOT although i know some one that will MOT it as long as the hydraulic hand brake is mechanically locked.

**Rocco** · 23 September 2010, 17:23

Originally posted by terrybullwon

I have boxster S calipers with a hydraulic hand brake, and no mechanical brake. But then i do not need a MOT although i know some one that will MOT it as long as the hydraulic hand brake is mechanically locked.

i know these stuff

how do you feel the brakes now?? wich pads are you using for??

**terrybullwon** · 23 September 2010, 17:55

Feels very good rocco but, I use a pedal box with twin master cylinders and a balance bar adjuster, with no abs system and own made braied lines. So to compare would not be fair. But I would say the standard master Is not big enough for big front brakes and such likes these on the rear.

**keithsw0** · 24 September 2010, 07:14

thanks guys for posts will look into these options

**Rocco** · 24 September 2010, 08:18

Originally posted by terrybullwon

Feels very good rocco but, I use a pedal box with twin master cylinders and a balance bar adjuster, with no abs system and own made braied lines. So to compare would not be fair. But I would say the standard master Is not big enough for big front brakes and such likes these on the rear.

mine seems to work perfectly....

you will have to show me the pics with the twin master cylinder mod

**terrybullwon** · 24 September 2010, 08:23

Originally posted by Rocco

mine seems to work perfectly....

you will have to show me the pics with the twin master cylinder mod

Just like this Rocco

**Rocco** · 24 September 2010, 08:33

o great

you will need it for the racing/track use

RS2 master cylinder is it bigger than the S2 3B one??

**S2central.net** · 24 September 2010, 08:49

NO - RS2 master cylinder is same as S2 - 3B/ABY... some smaller engined B3/B4 models have smaller master though.

**Jamo** · 24 September 2010, 08:56

Did we ever find out why the RS2 had two master cylinders in etka against it? and if it was bigger?

boxster s rear brakes on avant ?

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment