You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
The small reds can be mounted with the 314x30mm disc.
But these discs are only in 5x112 available.
This solution is often used by the S2 drivers.
As I said with the correct Bracket, I have a set of un drilled and un milled brackets
What I wanted to know is would it be possible ? or are they just too small for a 322mm disk
I have a set of 322mm disks and some brackets that could be used
Otherwise I will need to buy big reds or a set of small 304mm disks, cannot really afford the big reds at the present and its a shame to buy more disks when I have some and are planning a upgrade
I brought some of these ultmol disks from ebay and they have warpped badly after very few miles
The small reds are to small for the 322x32 disc.
The diameter from the disc is to big for the caliper.
Also another mounting bracket can not solve the problem.
The small reds are to small for the 322x32 disc.
The diameter from the disc is to big for the caliper.
Also another mounting bracket can not solve the problem.
Yes Thats what I thought, But wanted to have other advise
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment