330mm Discs

[205gti]

Are there any 330mm discs which fit onto the s2? I am upgrading to Cayenne calipers and they are used with a 330mm disc. I know there are 323mm ones available but I think they will be too small.

[s2driveruk]

can go up to a 345x30mm from memory - S8 disc IIRC. If you seach on here definate it will come up as I know I was looking to use it with a non 996/boxster caliper originally.

Cheers
David

[s2driveruk]

knew it was somewhere:

http://www.s2forum.com/forum/showthread.php?t=4014&highlight=345mm

[Jamo]

Did anyone find the hat height of them?

[205gti]

I did see the 345mm ones but I'm running 17 inch wheels and I don't think they will fit.

[Rusty]

There's a Mercedes 330x32 disc off a 99-05 S class. Overall height (mounting face to back of disc) is 70.0mm. Brembo part 09.7960.10 -

[s2_wot]

can go up to a 345x30mm from memory - S8 disc IIRC. If you seach on here definate it will come up as I know I was looking to use it with a non 996/boxster caliper originally.

Cheers
David

Did anyone find the hat height of them?

Jamo the S8 ones are here 345 x 30; p/n 4D0 615 310 E or 4D0 615 310 E

http://bremboaftermarket.com/En/Car_Disc_Catalogue/Catalogue_Detail_Image.aspx?Code=d1c3b975-a60c-47a5-8c31-af72e6a25c2f

[Jamo]

No not the S8 ones, the ones in the s2driveruk link, I know abotu the S8 ones as I had a set from GSF to meause up for the old coupe hehe

[Rusty]

There's no 334mm Passat discs on the brembo catalogue that I have

[Twenny Benson]

I have some 345mm discs on the front of the A4, from memory I'm sure there off the B6 S4!?! I've also used 330mm discs from an Alfa Brera but they required some machining to re-PCD them, there also a very shallow disc though, so might not be suitable and as such I didn't have them on for too long before moving to the S4 disc with a Ford GT caliper. This obviously assumes your S2 is 5x112.

[s2_wot]

No not the S8 ones, the ones in the s2driveruk link, I know abotu the S8 ones as I had a set from GSF to meause up for the old coupe hehe

These zimmermann ones cross reference with 3B7 615 301 B and this pic shows the hat height.

[205gti]

There's a Mercedes 330x32 disc off a 99-05 S class. Overall height (mounting face to back of disc) is 70.0mm. Brembo part 09.7960.10 -

How does the 70mm compare to the 323mm brake disks?

[Rusty]

323 are 52.15mm, as are the 314mm and 345mm discs. Clearance issue will be with the lower balljoint but you could space the disc off the hub and run some suitable offset wheels to match.

[205gti]

After doing a bit of measuring I think a 345mm disc will fit alright. Where is the best place to get them from?

[Rusty]

Audi or search for Brembo and get the best price you can.