Ultimot rear brakes

[Simons]

Hi guys

Anyone has the TUV certificate for this ultimot rear kit, disc 302x11 and adaptors


Thanks!

[Rocco]

Your current rear brakes will pass the TUV without problems.so don't worry for this small upgrades ,look myself...I pass it with hydraulic handbrake

[|Maku|]

Are those discs custom made or from some other model?

[Simons]

Your current rear brakes will pass the TUV without problems.so don't worry for this small upgrades ,look myself...I pass it with hydraulic handbrake

Hi S2Forum Possessed

Are you wating me behind the "musgo"?

Isn't for me, you know what I have, I need it for the guy who bought your Rs4 front brakes

Firstly, I need to finish my s2

Are those discs custom made or from some other model?

I think that they are drilled by ultimot but I don't know the car model

[Henkjan]

too bad they don't offer an adapter to use e.g. Boxter calipers for the rear with these disks

.... with hydraulic handbrake

any details on this?

[|Maku|]

Hi S2Forum Possessed
I think that they are drilled by ultimot but I don't know the car model

So, the question is, which car has 302x11 brake disc?

[Simons]

too bad they don't offer an adapter to use e.g. Boxter calipers for the rear with these disks

any details on this?

Rocco could make you a set of adapters to use boxster calipers on the rear brakes

So, the question is, which car has 302x11 brake disc?

You only need a disc catalog an time

But I don't like so much this kit...to use the original hand brake I prefer the quattro corner kit, Is what I have, take a look

http://www.s2forum.com/forum/showthread.php?t=48925

[macspring]

So does this Ultimot kit mean that if you buy it, you can fit their 302mm x 11mm non ventilated disc, then the Ultimot brackets, then an S2’s original brake caliper carriers and finally the original S2 brake calipers.

And your S2 rear brakes have gone from 245mm to 302mm, albeit unventilated.

Just curious.

If so, seems like a useful halfway house, compared to going the full hog of 300mm vented discs with new calipers and carriers from a later B chassis car.

Where you what the look of the bigger rear brakes, but don’t require the full performance of bigger rear brakes.

[Simons]

So does this Ultimot kit mean that if you buy it, you can fit their 302mm x 11mm non ventilated disc, then the Ultimot brackets, then an S2’s original brake caliper carriers and finally the original S2 brake calipers.

And your S2 rear brakes have gone from 245mm to 302mm, albeit unventilated.

Just curious.

Very curious and my friend pay, a year ago, around 500€ for disc and adapters...this is what he told me

I bought mine for around this price with shipping cost...bigger calipers (36 vs 41mm), ventilated disc, pads, brake lines, hand brake lines...all new. I bought because mi rear calipers was bad, and is a good choice to use original hand brake.

[Henkjan]

Rocco could make you a set of adapters to use boxster calipers on the rear brakes

that's a good start iirc the Boxter has also ~312 at the rear, so the B7's 300x22 might fit without machining???

[Simons]

If you really want the adapters, he told you all what you need