My RS2 has been stood for a year or so and the rear brakes were stuck, before i lay the car up again this year any advice on how to stop this happening again .?
-
-
take them apart and clean them up...
the barrel inside gets pretty corroded. I had to use alot of wet n dry paper to smooth it back out and they work perfectly now.
If you want them re-furbed completely let me know, i've made all the tools to re-assemble the calipers1996 Audi S2 - 295bhp and 326lb/ft - Complete Rebuild Project
1994 Audi 80 - 2.0 8v (slow but reliable!) -
Replace them with Monoblock 996 rear calipers and vrs caliper mountsComment
-
Not an option as want to keep the RS2 standard.Comment
Comment