Sorted ABS Problem !!!!!!

[CR500Dom]

Well thanks to the advice on here I took it back and we both went through it all again.
Took the Wheel speed sensors out and cleaned them up, also fully cleaned the housings where they locate, and the trigger section on the cv joint

Drove it down the road for a mile or so...... no light coming on
Did a brake test and wahey the ABS is working again

So To all those with advise and Part numbers and stuff I cant thank you enough

Thanks guys, I hope I can do the same someday

[martinjs]

Hows it drive with the S2 springs Dom?

[CR500Dom]

Hows it drive with the S2 springs Dom?

Good so far Thanks

Only got the Fronts in, along with new Bilstiens, new blues, new Pads, new Wheelbearings, new Droplinks and bushes and soon to be new Lower ball joints....
They only showed up now everything else is tight again

I cant wait to get the rears on now and give it a proper test

It just feels much more composed, stiffer yet still with excellent ride quality, standardish ride height, which will be better for the snow....

Very Happy so far.....
Theres a full initial summary in the S2 spring colour codes thread

I`ll keep that updated as I get more done....

Your springs have found a nice new home though cheers
Laters
Dom