Audi 200 rear hubs on CQ - disc's?

[|CL|NIKI]

Hi guy's,
I've machined rear bearing carriers (Audi Coupe Quattro NM) from 75mm to 82mm, to hold 82mm bearings. Than put Audi 200 rear hubs+axles+V8 torsen in to the diff case. So now - what rear disc's to use....? The A4 rear ones (245x10 and 40mm height) are too high. Needed something around 20-22mm height....?
Help please.

[|CL|NIKI]

No body do this transformation? - Audi 200 front and rear hubs, Audi 200 front/rear axles, Audi 200 outer and inner/front/rear CV's, - all this on CQ with AAN HTA86. Also V8 rear torsen + latest CGR (flexible shaft + wider first gear).
The rear audi 200 hubs stays lower than stock ones. Thats mean I need to use short hat rotors - around 20-22mm.
Which one?

[caterpillar]

s4 92-95... 270x24 ?? or front disk from 89-92 vw golf g60

[|CL|NIKI]

From S4 disc's are :
Diameter: 269mm
Height: 59mm
Thickness (new/min): 20/18mm
Years: 91 > 94
-------------------------
Diameter: 245mm
Height: 48mm
Thickness (new/min): 10/8mm
Years: 97 > 99
-------------------------
Diameter: 256mm
Height: 48mm
Thickness (new/min): 22/20mm
Years: 99 > 2003
-------------------------
Diameter: 330mm
Height: 36mm
Thickness (new/min): 22/20mm
-------------------------
Diameter: 300mm
Height: 36mm
Thickness (new/min): 22/20mm
Years: 2003 > 2008
-------------------------
From Golf G60:
Diameter: 239mm
Height: 39mm
Thickness (new/min): 10/8mm
Years: 89 > 91
----------------------------
Diameter: 226mm
Height: 71mm
Thickness (new/min): 10/8mm
Years: 84 > 91
----------------------------
They are 4 studs.
So - no one is even closer .....

[caterpillar]

you have to make some spacer/ new
carrier for the brakeunit in the rear

[|CL|NIKI]

New position for the calipers are not the solution. The OEM rotors are too close to the bearing carriers.
The first option is the spacers between the hub and disc..... I dont know is this Ok or not, but once I all ready done this for front rotors. It's work....

[malncol]

check out mercedes discs there 5x112 and have low height center bore is very close as well
mal

[|CL|NIKI]

They,in all models are higher...