You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
I'm pretty sure Tom used 5mm speacers and had them made somewhere. I guess he'll confirn this.
Have you tried www.trackstore.co.uk/customspacers.html they have spacers listed for 5 x 112 Audis (although there is a mistake on the site as it says 5 x 100 but they are for A6, A8 100s etc) but are only 15mm.
They may be able to supply a set of 5mm if you ask. Pretty cheap too
I needed a 5mm spacer. These were bought via demon *****, sorry tweeks. There were about 12 quid for the pair. There are universal ones and do give a slight wheel wobble. Not that bad.
I tried using the standard bolts but they only screwed in about 2 threads, not enough, so i bought some new bolts via DT again. These actually came direct from Grayson(?),the info is a work with regard to legth, i think they are 35mm long and not the standard 27mm long. These fit fine. Only prob is that they have 19mm hex and not 17mm.
BTW, what are you up to Mr N?
sigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nm
It has altered the handling. It now tram lines a lot more and i mean a lot. Some sections of the M1 in the inside lane are awful. But on a plus point it has improved grip when cornering. Tempted to put some 10mm spacers on back to make the back grip a bit more.
sigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nm
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment