The past few days I have had brake problems as if the servo assistance is not working when braking. At first brakes seem to be working fine. But if braking soon after its like braking with the ignition off. I have had the warning on the dash but had gone off.
I changed the small rubber hose as it was perished which connects to hard plastic pipe to servo.
Rear calipers replaced with new and the front has had new discs pads.
No real change since I replaced it.
Any other suggestions welcome.
Not had the chance to check codes.
I changed the small rubber hose as it was perished which connects to hard plastic pipe to servo.
Rear calipers replaced with new and the front has had new discs pads.
No real change since I replaced it.
Any other suggestions welcome.
Not had the chance to check codes.
Comment