RS2 brakes in Audi S2 3b?

[AudiS2]

Hello, I´m a new user. I write from Spain, I have some questions.

I wanto to put RS2's brakes in my Audi S2, motor 3b, i think that it's possible, but i have some doubts lika what i need to put this brakes in my car, i need to buy calipers from RS2,etc, but i don't know if i need anything special, Do i need anything special? Is difficult to put it?

Thanks for all.

[NoNonsense]

Hello, I´m a new user. I write from Spain, I have some questions.

I wanto to put RS2's brakes in my Audi S2, motor 3b, i think that it's possible, but i have some doubts lika what i need to put this brakes in my car, i need to buy calipers from RS2,etc, but i don't know if i need anything special, Do i need anything special? Is difficult to put it?

Thanks for all.

Welcome aboard! A nice upgrade with stock Audi parts and modern porsche calipers is:
996 C2/4 calipers (black) or BoxsterS calipers (red)
RS2 brake caliper carriers
and A8 rotors at 314mm x 30mm

Also get stainless braided brake lines and machine the pins in the calipers down 1mm each. Very simple upgrade, parts can be had easily, and you can retain the 5x112 pattern on your hubs, wheels, and rotors.

[AudiS2]

Welcome aboard! A nice upgrade with stock Audi parts and modern porsche calipers is:
996 C2/4 calipers (black) or BoxsterS calipers (red)
RS2 brake caliper carriers
and A8 rotors at 314mm x 30mm

Also get stainless braided brake lines and machine the pins in the calipers down 1mm each. Very simple upgrade, parts can be had easily, and you can retain the 5x112 pattern on your hubs, wheels, and rotors.

Thanks for all, i understood that this modification is easy and possible, and i don't need anything special.

Thanks for all.

[Mikes2]

If you fit these parts, and you have standard 5 spoke alloys, you will have problems. The 5 spoke speedline alloy as fitted to S2s until 1994 MY, will not clear a Porsche front brake set up.