G60 guide pins and boots ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • stocious
    S2Forum Maniac
    • Jul 2012
    • 838
    • Country: Ireland

    #1

    G60 guide pins and boots ?

    Are theses still available from audi ? or are they available as kit elsewhere.

    Have ETKA but it wont install on my computers operating system unfortunatly !

    would like to use new guide pins,boots and bolts, been looking online , vagcat ect..

    but no luck

    Steve
    1991 S2 3B Coupe, KW v1, solid sub frames, poly bushed, chipped, about 260 ish
  • Ironman80
    S2Forum Fanatic
    • Mar 2009
    • 53
    • Country: Russian Federation

    #2
    TRW SP 9896

    maybe it will help
    sigpic

    Comment

    • UrS4boy
      S2Forum Obsessed
      • Feb 2006
      • 11859
      • Country: Canada

      #3
      Originally posted by Ironman80
      TRW SP 9896. maybe it will help
      Interesting. I googled "TRW SP 9896 " and on the first page of results *EVERY* webpage was Russian.
      RS2'd 93 UrS4 5 spd sedan
      94 UrS4 V8 6 spd manual avant

      Comment

      • 220bhp
        S2Forum Fiend
        • Nov 2004
        • 2578
        • Home: United Kingdom

        #4
        The pins are 10 mm x 60mm . The 60mm is just the length of the pin not including the head. Same on some Volvo's ,and I believe the rear callipers on Audi a4.

        Comment

        • Error404
          Super Moderator
          • Mar 2007
          • 19789
          • Country: United Kingdom

          #5
          Good info there on the TRW number as AFAIK Audi will only sell you a complete carrier
          Panthero Coupé quattro 20vt
          Indigo ABY coupé
          Imola B6 S4 Avant

          Comment

          • K Simmonds
            S2Forum Zealot
            • Dec 2007
            • 7627
            • Country: Wales

            #6
            Originally posted by 220bhp
            The pins are 10 mm x 60mm . The 60mm is just the length of the pin not including the head. Same on some Volvo's ,and I believe the rear callipers on Audi a4.
            Yep I've used A4 rears on mine, I lost a pair while the car was in bits.
            1990 B3 2.0 80 quattro.
            1992 C4 2.8 Avant quattro
            1994 MTM RS2.
            1998 B5 TDI quattro Sport.
            2000 B5 TQS.

            Comment

            • stocious
              S2Forum Maniac
              • Jul 2012
              • 838
              • Country: Ireland

              #7
              I will try and see can i pick up the TRW kit in motorfactors.

              cheers for the pics/info
              1991 S2 3B Coupe, KW v1, solid sub frames, poly bushed, chipped, about 260 ish

              Comment

              • mdz
                S2Forum Maniac
                • Jun 2012
                • 775
                • Country: Latvia

                #8
                I bought these for my G60's

                Comment

                • afterburner
                  S2Forum Addict
                  • Mar 2012
                  • 246
                  • Country: Bulgaria

                  #9
                  Strange thing happened. I ordered TRW SP9896, but it's not the same kit.

                  The packaging lists different vehicles, but the same part number. The actual pins are smaller than those of the Girling 60 calipers. Actually they are the same size as stock rear Audi B3/4 calipers.

                  Maybe they assigned the same number to a different kit? I'm afraid of ordering another set of pins, now.



                  Attached Files

                  Comment

                  Working...