Help! Pin out schematic for ....

[panzerwagen]

headlite adjuster switch? Trying to wire it up correctly. Anybody?

[pastures16]

bens your man but hes on his hols

[pastures16]

headlite adjuster switch? Trying to wire it up correctly. Anybody?

found this on audifans but suspect its you

got the light replaced in the switch and it sems that pins #5 is the 12V power for the light and pin #6 is the ground for the light.

so here is what ive figgured out so far

2 - brown/blue (thick)
3 - yellow (thin)
4 - brown/white (thin)
5 - black/blue (thin) = 12V power for illumanation
6 - brown (thick) = ground for illumanation

so that leaves pins 2 3 and 4 to be figgured out. If I test for a circut using pin 6 as my "ground" I get these results in the diff switch positions.

position 0 = pin 2= live (circut)
pin 3= dead (no circut)
pin 4=dead

position 1 = pin 2=live
Pin 3=dead
pin 4=live

position 2 = Pin 2=live
3=dead
4=live

position 3 = pin 2=live
pin 3= dead
pin 4= live

now the way the results are the sam for pos #'s 1 2 and 3 it leads me to believe that there might be a diff ground for the leveling function?? ( I was using ground for the illumanation (#6))