Need help on a connection plug for temp. sensor!

[AndersS2]

Hi!

As my connector (sticker?) which goes into the main temprature sensor (on the water manifold) has shatterd into pieces the four wires is just lyng there in the rubber "protection cap". I now have bought a new plug to fit the wires in, but this is a one-time-fit only, so i would need the correct pattern on these four (4) wires. They are going into the plug which then is clicked onto the main sensor on the water manifold.

Anyone got a clue what i'm talking about? oh, and it's a '93 ABY avant.

[Mark Halligan]

I had to fit a new plug to mine and used the wiring positions shown in this old post

http://www.s2forum.com/forum/showthread.php?t=9901

It works fine.

I think thats what you meant?

Cheers

[AndersS2]

Yes thats the one!
thanks mark!

I will go out and give it a go now. I'll report back asap

PS did get a link from AndyP which can be useful:

http://www.sjmautotechnik.com/trouble_shooting/cooling.html

[AndersS2]

Yep, it did work!
thanks for the easy link Mark.

I just used this order:

1 = Blue/Brown
2 = Blue/White
3 = Blue/Black
4 = Blue/Yellow

As NEO posted in his original thread.




Cheers,

[pixsaudisex2]

well just like to say thanks to this thread as well i have broken the plug and needed too find out what wire went where but my gauge still never moved so tryied earthing said wire still nothing at gauge so i took my cluster apart and found a nut on the back of the gauge had came loose tighted the nut up and my gauge worked again love a cheap fix just thought id add this to the thread so thank you...