Hid Kits

[Jamo]

Nice domain name!

[rotoryboy]

Contact us

If you have any questions and would like to contact us, please use the details below. The fastest way to get hold of us is via Email, so please use the email address where possible.

PLEASE NOTE - The following address is for correspondence and returns ONLY.


HIDS4U Limited
PO Box 188
Morley
LEEDS
LS27 1AY

For All General Enquiries sales@hids4u.co.uk

Sales Enquiries & Customer Services
(Mon-Fri 0900-1700 hours GMT or BST) 0870 892 1245
Fax: 0870 892 1243

[S2Ian]

i moved that ballast around, and i think its gone pop, its popping fuses like nobodys business, but when you put a 30amp fuse in it wont pop it but still doesnts come on

bloomin cars, i like the look of the vag parts ones, might have to get me a set... not too fussed about having 2 sets at once, more worried about not being able to see properly.



Thought it might have been the autocheck as the light comes on on the dashboard, but if the light is only working with the correct ballast surely that suggests that the ballast i fooked?!?!?!?

[Jamo]

i moved that ballast around, and i think its gone pop, its popping fuses like nobodys business, but when you put a 30amp fuse in it wont pop it but still doesnts come on

bloomin cars, i like the look of the vag parts ones, might have to get me a set... not too fussed about having 2 sets at once, more worried about not being able to see properly.



Thought it might have been the autocheck as the light comes on on the dashboard, but if the light is only working with the correct ballast surely that suggests that the ballast i fooked?!?!?!?

Nothing wrong with the auto check IMO it simplys comes as it recognises the light dont work.

Have a word maybe with Rotoryboy and getting a wiring diagram for them HID's as they are wired differently from the VAGParts one in your installation.

Have you tried switching the ballasts?

[S2Ian]

yeh i tried switching the ballasts, and the drivers side one works fine. so in my opinion i just need 2x ballasts.....or a kit which ever is cheaper, had a look at the wiring setup, didnt seem too complicated.

Had a look at the HID4U website & the wiring seems pretty similar.

[Jamo]

Yeh but theres no seperate earth it uses the stock earth within the headlight i couldn't figure out why there wasn't a seperate earth for each ballast.

[Jas11n]

Just for clarification
The kit now fitted to S2Ian's car has nothing whatsoever to do with me and Mark. I just remember where Graham got them from, hence myself posting a link and again Mark (rotoryboy) has posted links to contact them.
Hids4u have nothing to do with me or Mark. IIRC they used to be based in the North, but moved south a while ago.

I never saw how Graham fitted them either, so can't help on that particular wiring setup.

Jas..

[Crawford_S2]

Got my HID kit through Jas11n's GB and strapped them on today, few pointers from the S246parts site and bling, awesome lights and no autocheck problems.

Did have to shell out 70p for some wire and two female spade connectors though:mischeif:

Nice one Jas11n, top mod, up there with 996 brakes i reckon

Crawf

[Jamo]

Just for clarification
The kit now fitted to S2Ian's car has nothing whatsoever to do with me and Mark. I just remember where Graham got them from, hence myself posting a link and again Mark (rotoryboy) has posted links to contact them.
Hids4u have nothing to do with me or Mark. IIRC they used to be based in the North, but moved south a while ago.

I never saw how Graham fitted them either, so can't help on that particular wiring setup.

Jas..

Ack wassn't trying to point the finger just telling Ian where to look next.

Rotoryboy did you ever find out if you do kits for the Golf Mk2?