Sparkplugs for 3b ?

[Condor]

Hi All, Champion RS9YC Spark Plugs,would these be suitable for a 3b? & what size plug socket is needed for S2 sparkplugs ?.
Thanks....Condor....

[4WheelDrifter]

Just use OEM Bosch F5DPOR plugs.

You may find this interesting.

[s2dude]

There is a special tool from Audi available, 3122B, which is a thin socket with an extension bar attached but its not needed.

I bought a tool from Samik motor spares...the halfords 16mm T bar tool fitted but was CRAP as you cant specify the correct torque setting (or apply much torque with it to undo).

Also...what 4 wheel drifter said...

http://www.s2forum.com/forum/showpost.php?p=31665&postcount=4

[jameswkr]

I posted my experience using non standard plugs way back. A complete waste of time and... a) Lasted less than 1000 miles b) Made the car run badly after about 200 miles.
Use only F5DPOR.

[PeteRR]

I'd only ever use Bosch F5DPOR plugs too.
My 3/8" drive Kamasa spark plug socket fits a treat. Though I do take out the rubber insert.

[Condor]

Thanks everyone

Thanks everyone for taking the time to reply with advice on the sparkplugs ect.
Best wishes Condor...