Hello,
I want to access the airbag control unit to check the connections as I have many defaults and the light on.
I know that the unit is behind the 3 gauges in the dashboard.
Can someone indicate the best way to access the control unit ? What I have to remove ?
Thanks
Thierry
Here are my defaults :
VCDS-Lite Version: Release 1.2
Friday, 24 November 2017, 15:58:31:22692
Control Module Part Number: 8A0 959 655 C
Component and/or Version: Airbag V AUDI D00
Software Coding: 01022
Work Shop Code: WSC 00036
VCID: 3319C46B122D
4 Faults Found:
00532 - Supply Voltage B+
07-10 - Signal too Low - Intermittent
65535 - Internal Control Module Memory Error
00-10 - - - Intermittent
01025 - Trigger for On Board Diagnostic Lamp; Malfunction
31-10 - Open or Short to Ground - Intermittent
00654 - Seat Belt Tensioner Igniter; Driver Side (N153)
32-10 - Resistance too High – Intermittent
I want to access the airbag control unit to check the connections as I have many defaults and the light on.
I know that the unit is behind the 3 gauges in the dashboard.
Can someone indicate the best way to access the control unit ? What I have to remove ?
Thanks
Thierry
Here are my defaults :
VCDS-Lite Version: Release 1.2
Friday, 24 November 2017, 15:58:31:22692
Control Module Part Number: 8A0 959 655 C
Component and/or Version: Airbag V AUDI D00
Software Coding: 01022
Work Shop Code: WSC 00036
VCID: 3319C46B122D
4 Faults Found:
00532 - Supply Voltage B+
07-10 - Signal too Low - Intermittent
65535 - Internal Control Module Memory Error
00-10 - - - Intermittent
01025 - Trigger for On Board Diagnostic Lamp; Malfunction
31-10 - Open or Short to Ground - Intermittent
00654 - Seat Belt Tensioner Igniter; Driver Side (N153)
32-10 - Resistance too High – Intermittent
Comment