ABS lamp on the dashbord

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • S2_avant 19930325
    S2Forum Maniac
    • Mar 2019
    • 648
    • Country: Sweden

    #1

    ABS lamp on the dashbord

    Hi
    Is it possible to disconnect the lamp for the asb in dash panel ? I want to deactivate the lamp so when the ignition or when the car is running so it does not glow ?
    Best regards
  • Monkeymagic
    S2Forum Possessed
    • Mar 2012
    • 3419
    • Country: England

    #2
    You can take the bulb out. But of everything is working correctly it should go out after start up anyway.

    Comment

    • S2_avant 19930325
      S2Forum Maniac
      • Mar 2019
      • 648
      • Country: Sweden

      #3
      The car is at fault and when i do the inspection the light can not glow , is it that easy just like a bulb really ?

      Comment

      • S2_avant 19930325
        S2Forum Maniac
        • Mar 2019
        • 648
        • Country: Sweden

        #4
        Are you 100% sure , have done it on other older cars but not on a s2

        Comment

        • Monkeymagic
          S2Forum Possessed
          • Mar 2012
          • 3419
          • Country: England

          #5
          From memory it is a bulb. Just twist the bulb 90 degrees.

          Comment

          • S2_avant 19930325
            S2Forum Maniac
            • Mar 2019
            • 648
            • Country: Sweden

            #6
            Is it not something that you can disconnect where the handbrake is or so do something with the wires there ? So you can choose to do it that way .

            Comment

            Working...