Announcement

Collapse
No announcement yet.

audi 80 b4 wiper stalk

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • audi 80 b4 wiper stalk

    not sure if ive posted this in the right place ,but can anyone tell me if the audi 80 b4 wiper and indicator stalk are the same on a 3b coupe part no.443953513H

  • #2
    I believe they will be. Only doff may be the toggle switch for computer.

    Comment


    • #3
      You'll need one from avant, because rear wiper.
      If you can use screwdriver then you can swap over the comptuer switch to another stalk without it.
      1989 Audi 80 Quattro
      1994 Audi 80 Quattro Competition

      Comment


      • #4
        M2ki is it easy to switch out the computer switch to one without. Do they just pop out easy enough with a flat screwdriver.?
        and does it definitely have to be an advant one. Thanks

        Comment


        • #5
          I think it was 4 philips screws. Remove the screws and swap the stalk with plug and wires to the new body.
          1989 Audi 80 Quattro
          1994 Audi 80 Quattro Competition

          Comment


          • #6
            hi guys. been a long time since i been here.

            there is one potential difference. procon column has a narrow center and wont fit on an airbag column

            Comment


            • #7
              Originally posted by GazzaG60 View Post
              hi guys. been a long time since i been here.

              there is one potential difference. procon column has a narrow center and wont fit on an airbag column
              Procon and earlier airbag version has the same column. "Thick" column was fitted from 07.1994 onwards.
              1989 Audi 80 Quattro
              1994 Audi 80 Quattro Competition

              Comment

              Working...
              X