Announcement

Collapse
No announcement yet.

Oil pressure gauge fault on Audi S2 ABY

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Oil pressure gauge fault on Audi S2 ABY

    Hello

    I have a problem with my Audi S2, Oil pressure gauge in the center console goes up to max even without the engine started. It stands at max constant.
    I tried another gauge, same fault. New sensor in engine, same fault.

    Is there anyone here who can tell me where in the car the problem is ?

    Thanks in advance
    (sorry for my bad english.)

    Regards
    Michael - Denmark

  • #2
    I had this same fault. Check your wires to the gauge and also make sure the replacement is the correct new one. Don't trust a second hand one.
    Nothelle S2 Avant
    Black Ur project
    Ocianic Ur project gone
    S2 Coupe project gone
    Urs6 plus project gone

    Comment


    • #3
      Originally posted by Tractor Dave View Post
      I had this same fault. Check your wires to the gauge and also make sure the replacement is the correct new one. Don't trust a second hand one.
      The replacement i tried was from my AAN S4, and i know that one was working

      Comment


      • #4
        You are changing the right sensor? The cotton reel one?
        Nothelle S2 Avant
        Black Ur project
        Ocianic Ur project gone
        S2 Coupe project gone
        Urs6 plus project gone

        Comment


        • #5
          This is the new one I bought for mine. I also found a short in the wires that run along the water pipes.
          Nothelle S2 Avant
          Black Ur project
          Ocianic Ur project gone
          S2 Coupe project gone
          Urs6 plus project gone

          Comment


          • #6
            Originally posted by Tractor Dave View Post
            This is the new one I bought for mine. I also found a short in the wires that run along the water pipes.
            Jep, thats the sensor i have changed

            Comment


            • #7
              You need to check the wires then to the two round plugs on the bulkhead.
              Nothelle S2 Avant
              Black Ur project
              Ocianic Ur project gone
              S2 Coupe project gone
              Urs6 plus project gone

              Comment

              Working...
              X