Instrument cluster schematic

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Tractor Dave
    replied
    Done


    I have no way of testing the Rev counter or speedo but I can get just about everything else working on the bench which is very handy.


    Sent from my iPhone using Tapatalk

    Leave a comment:


  • Rikki Kitto
    replied
    Are you thinking of offering a cluster repair service

    Leave a comment:


  • Tractor Dave
    replied
    Nearly there.



    Sent from my iPhone using Tapatalk

    Leave a comment:


  • Mikes2
    replied
    Originally posted by Bowie69
    Most helpful.

    Confused why the heated rear window and a couple of other things go to the dash, but there we are
    I'm pretty sure it's for background lighting. The grey / blue wire supplies lots of circuits to provide ambient lighting and it comes via the dimmer in the cluster.

    Leave a comment:


  • Antsa
    replied
    Yes if you are willing to pay to access the erwin system. But the pinouts are listed in the link above

    Leave a comment:


  • pfi
    replied
    Originally posted by Antsa
    I have a pdf file which I downloaded from erwin a long time ago for my aby avant. It contains pinouts for the blue and yellow connectors. I know it's not complete but it could be a little help
    Is this pdf available as a download ?

    Leave a comment:


  • Tractor Dave
    replied
    Originally posted by johne
    The pinouts for the blue and yellow connectors are in Bentley in the Electrical Systems - Instruments section.
    Thanks John. I got that from Antsa

    Leave a comment:


  • johne
    replied
    The pinouts for the blue and yellow connectors are in Bentley in the Electrical Systems - Instruments section.

    They broadly agree with those listed in the link. :http://s2-audi.co.uk/tech_articles/instruments.htm

    but Bentley lists:-

    T26 pin 24 as the negative connection to the oil pressure warning light (so not a +ve supply)

    T26a pin 24 as -ve connection to engine control indicator light
    T26a pin 25 as -ve connection to seat belt warning light
    T26a pin 26 as +ve connection to seat belt warning light

    (T26 is the yellow connector, T26a is the blue connector)
    Last edited by johne; 8 November 2021, 09:27.

    Leave a comment:


  • Tractor Dave
    replied
    Originally posted by Mikes2
    Brilliant

    Leave a comment:


  • Bowie69
    replied
    Most helpful.

    Confused why the heated rear window and a couple of other things go to the dash, but there we are

    Leave a comment:


  • Mikes2
    replied
    This may help - http://s2-audi.co.uk/tech_articles/instruments.htm

    Leave a comment:


  • Tractor Dave
    replied
    Thanks John.
    Yes please Antsa. I will send you a pm

    Leave a comment:


  • Antsa
    replied
    I have a pdf file which I downloaded from erwin a long time ago for my aby avant. It contains pinouts for the blue and yellow connectors. I know it's not complete but it could be a little help

    Leave a comment:


  • newsh
    replied

    Leave a comment:


  • newsh
    replied

    Leave a comment:

Working...