S2 Immobilizer Votex 604 C

[C1Stolli]

Hello All,


I received a S2 from the customer to remove the above immobilizer.
The car runs, just not always because of the immobilizer.
I have known the customer for a little over a year (decent businessman), know his fleet and trust him.

Does anyone please have the installation instructions for the VOTEX 604 C?
Please PN or email if necessary.


Many greetings
Mario

[Tractor Dave]

It's unlikely you will find the plan for the wiring as manufacturers tended not to publish this for obvious reasons. Many of us here have removed alarm systems and it's normally a case of locating the control box and tracing back all the wires one by one. Control box is probably under dash kick panel. Mine was cut into ignition, fuel pump, central locking, interior light and permanent live.

[C1Stolli]

Thank you Tractor Dave.
I understand and I will take this way if there is no other left ...
but i am not a thief or something, have not any criminal intends - my job is to help classic car owners with electrical problems, and I am specialized on aircooled Porsches, this Audi is an exception for a Client (a car collector)

... it would help me a lot to get the electrical wiring diagram of that chassis
-
this was built immediately before April 1991 and has VIN
WAUZZZ8BZMA010685.

Is there a member to help me with a pdf or similar?
Email is:
subito911@web.de

Yours Mario

[Tractor Dave]

Try S2 central. Lots of schematics there.