Audi 100 C4 to S4 Headlights

[Danoid]

Hi, I'm trying to get some Audi S4 C4 projector headlights and fit them onto my car.

I'm coming across a few problems already and I've not got them just yet, my problems are...

My Current headlights have 2 connections, 1 for height adjustment, 1 for dipped/full/main beam

The S4 headlights have 3 connections, 1 for height adjustment, 1 for dipped/full/main and the other connection for the bottom projector.

But I've only got 2 connections, the other connection that I don't have powers up the bottom projector, so how would I get that to work? I'm not good at electrical things and I'm bound to get raped by an electrician to wire it up for me.

Does the top and bottom projector come on at the same one?

http://www.pgperformance.com/old/images/audi100s4hl.jpg you can see in that photo what I mean about the top and bottom projector.

Also, can anyone send me a picture of what there lights look like when there switched on, because 2 projector lights running at once sounds very bright to me.

Oh yer and another thing, at the back of these S4 lights the 4 pin connector is furthur away and my 4 pin connector won't move anymore, is it worth taking the plastic under wheel arch off and try to pull it another inch or two?

I've been after these lights for years and now I've ran into problems, please help

[80Quattro]

I believe the lower projector part is in fact a fog light. My friend has a C4 A6 with projector headlights but without fog lights and the lower projector is just blanked off. If you have separate fog lights at the moment you could just switch the wires to the connectors onto the back of the new projector headlamps. Otherwise you could wire in fog lights or just leave them disconnected.

[Skull]

True, that is the foggy.