Mates! Sorry but does anyone knows what is the color of the RPM wire behind the cluster? in wich connector is it? I have a wiring diagram but it doesn't say nothing about colors
RPM wire behind the cluster...
Collapse
X
-
-
From diagrams and looking at a loom. It is the lilac wire with the black trace. It runs from the blue plug at the back of the clocks to the Brown connector on the relay plate under the dash. Hope this helps.
BrianComment
-
Perfect Brian... and thank you a lot mate! I needed to know because the VEMS ecu needs that wire to send the signal together with a resistor with 12V power supply to the tacho. Thanks again brother!
Cheers!- Looking for a S2
- Lancia Dedra HF turbo i.e. (4sale)
- Typ89 Coupè quattro, 20Vt AAN, VEMS, K24-7000@1.3bar (scrapped )
sigpicComment
-
Found another diagram with diff colour codes....
Section G5 is fed by green/blue so I am a little confused now....
From 94-> Autocheck page 1
Comment
-
In fact bro...I did the job with the lila/black wire and when I switched the dash ON the brake alert on the check control turned on with a damn dizzy noise!!! I think is no the lila wire on the blue plug!
So... I'm on the G5 section but... dude! I can't understand a wire on that diagram! hehehe
- Looking for a S2
- Lancia Dedra HF turbo i.e. (4sale)
- Typ89 Coupè quattro, 20Vt AAN, VEMS, K24-7000@1.3bar (scrapped )
sigpicComment
-
defo the BLUE/GREEN wire....i wired up my sequential shift lights to this as its the feed for the rpm
Comment
-
-
-
AAAHHMMM.....ANDY! Hey, there are 2 GREEN/BLUE wires, one goes to the yellow connector behind the tacho, and the other one goes to the white connector that is beside the yellow plug!
But on the yellow connector there's another wire but that is BLUE/LIGHT GREEN (I mean, blue wire with a light green stripe) wire... it might be this one for the tacho signal, right???? I'm a little confused!!!- Looking for a S2
- Lancia Dedra HF turbo i.e. (4sale)
- Typ89 Coupè quattro, 20Vt AAN, VEMS, K24-7000@1.3bar (scrapped )
sigpicComment
-
From reading the wiring diagram on that link i sent you it appears to be the one that goes into the white plug.... It should be pin no 23....
Hope this helps.Comment
Comment