I received the 1991 binder of schematics from Audi this week. I was hoping that would be the last one to complete the set (adding to my four other binders) for all S2/RS2 situations. However, much of the 1991 listings call up stuff from the 1990 binder 
That'll have to wait, cos there's a good bet I'll need 1989 as well and so on ...
Anyway - useful bit of info is that the 1991 binder covers 80 Coupe and Saloon - as they are both B3 platforms (8A and 8B chassis). I had hoped this would be true and it is.
For anyone else keen / brave / stupid enough to go shopping for schematics on Erwin its also worth knowing that from 1992 onwards the binders are split for 80 saloon and avant (B4 = 8C chassis) and 80/90 Coupe /Cabrio (8B and 8G chassis) - and also that they cross link to each other rather a lot. Then there's an update from 1994 onwards for both platforms. Meaning that for example if you have a 1994 Coupe, you need four binders (and 500 Euros) to source all the wiring for the car.
Enjoy the compilations relevant for S2 & RS2 on here for now - I'll complete this in slow stages eventually - its rather tiresome to say the least as there's plenty of mistakes in the original material that I had to work round.
If anyone desperately needs some 1991 specific wiring for 3B, 7A, NM, NG, KV or other other engines then I can help.
RS2 owners can use S2 Avant for now - there's precious few differences but I can help anyone with specific issues if required.
That'll have to wait, cos there's a good bet I'll need 1989 as well and so on ...
Anyway - useful bit of info is that the 1991 binder covers 80 Coupe and Saloon - as they are both B3 platforms (8A and 8B chassis). I had hoped this would be true and it is.
For anyone else keen / brave / stupid enough to go shopping for schematics on Erwin its also worth knowing that from 1992 onwards the binders are split for 80 saloon and avant (B4 = 8C chassis) and 80/90 Coupe /Cabrio (8B and 8G chassis) - and also that they cross link to each other rather a lot. Then there's an update from 1994 onwards for both platforms. Meaning that for example if you have a 1994 Coupe, you need four binders (and 500 Euros) to source all the wiring for the car.
Enjoy the compilations relevant for S2 & RS2 on here for now - I'll complete this in slow stages eventually - its rather tiresome to say the least as there's plenty of mistakes in the original material that I had to work round.
If anyone desperately needs some 1991 specific wiring for 3B, 7A, NM, NG, KV or other other engines then I can help.
RS2 owners can use S2 Avant for now - there's precious few differences but I can help anyone with specific issues if required.
They have helped me alot with my project. Much appreciated
Comment