Info needed of relay part numbers.......

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • john881000
    S2Forum Maniac
    • May 2004
    • 598
    • Country: United Kingdom

    #1

    Info needed of relay part numbers.......

    Hi All

    I ,am needing somehelp,with relay part numbers, please from those with the special,SOFTWARE

    Its in connection,with the engine wiring harness of a 1.9 TDI engine 1Z engine....i got my wiring harness back from wreck ,and my mates pulled the relays off there posts to remove wiring from housings and dumped them in a bag

    My problem is i havnt got an idea where the relays are located ,and there functions and which go where..i also have too many relays too.




    Here is list of the relays.....

    219 443 951 253 AA
    204 431 951 253 H
    214 443 951 253 K
    213 443 951 253 J
    202 8A0 951 253
    229 431 955 531
    263 443 907385 F
    373 8D0 951 253 A
    370 8D0 951 253

    443 919 469
    332 014 156.....BOSCH



    Any help would be great ,as well if possible the part numbers and locations of the relays in main fuse box....a photo would be great too.



    Hoping not askin to much.

    cheers
    john
    Last edited by john881000; 13 April 2009, 21:27.
  • S2central.net
    Retired OG Mod
    • Jul 2003
    • 16590
    • Country: Northern Ireland

    #2
    219 is Auxiliary Position 14 (one four) for 1Z engine from late 94 onwards
    204 doesn't compute yet for 1Z
    214 isn't clear either.....

    The family album is poor for this... You really need to get someone that owns a similar year 1Z machine to advise which relay numbers line up. I can look up schematics for your model year and provide some guidance - but that won't find a home for each relay quickly... Though you could reverse engineer it from pin numbers on the relays if you had to.
    Paul Nugent
    Webmaster http://S2central.net
    Administrator http://S2forum.com

    1994 S2 Coupe ABY - aka Project Lazarus
    2001 A6 allroad 2.5TDi - family tank
    2003 S4 Avant 4.2 V8 - daily burble

    Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)

    There are only 10 kinds of people that understand binary - those that do, and those that don't

    Comment

    • john881000
      S2Forum Maniac
      • May 2004
      • 598
      • Country: United Kingdom

      #3
      info

      Hi Paul

      cheers for quick reply
      when they stripped my car with me i asked them if posibble to refit relays/control units to gether,but it didnt happen that way

      now i fitting items to donor shell early 93 Audi 80,and cant get engine to start ......mine avant was a late 94 model................the only difference is i not using the rear section of wiring loom............that includes the central locking system....................( when car locked the harazard light switch flashed) woulod that be causing the non starting?.......and should i change this as well?


      cheers again

      john

      Comment

      • john881000
        S2Forum Maniac
        • May 2004
        • 598
        • Country: United Kingdom

        #4
        Engine still a non starter.......

        hi Paul

        I found a donor car and checked relays all,ok.......two have different,part numbers,but i think they where supperseeded.

        All relervant plugs seem to ,be accounted for ,but, for two

        One is a red wire ,with a white single plug

        Second one is a single single plug with two wires comong off it,red and green wires.

        Do you know where they go??.........i looked on the diagrams here but cant find a location.........http://s2central.net/80TDi/Schematics/schema.html

        IF i short the fuel cut off solienoid, car starts, but doesnt on its own accord,

        angain only wiring not connected at present is the alarm./central locking loom...would this be the cause of my heart ache??

        Any help again would be great...........

        cheers
        john

        Comment

        Working...