HELP: Indicators don't work

[Prophet_dlx]

as above, as hazard warning lights they work just fine, relay is working fine too
can't find the problem...

[s2_bo]

Is your switch ok? Maybe its worn out..

[Prophet_dlx]

In both directions at the same tme? I doubt it.
There are 3 wires that seem responsible for the indcators and none of them is a "power supply"

[Chris P]

Had exactly the same problem recently. The hazards worked fine and the relay was sound but the indicator stalk would not work. My brother has a spare column stalk so just swapped them over and they work fine.

[Prophet_dlx]

Vocabulary problrm . Sorry Chris but I don't understand what you replaced exactly!

[YELL MAN]

Vocabulary problrm . Sorry Chris but I don't understand what you replaced exactly!

I think he said he replaced the stock

[Prophet_dlx]

just tested the "stock" and it is fine, my probleem seems to be that there is no power feed towards the column

[Chris P]

Sorry, probably not the best word for it. I mean the whole assembly on the steering column that is the indicators, hazard warning & lights. My problem was that the indicator switch was not working but all the other ones were ok.