source of 12v ignition

[jade]

As above can anyone advise on a good source of 12v ignition on only

Thanks

[caterpillar]

for what car??

[S2central.net]

whereabouts on the car ?

I mean no point advising for fusebox location for example if the destination is somewhere at the tailgate.

[jade]

whereabouts on the car ?

I mean no point advising for fusebox location for example if the destination is somewhere at the tailgate.

Beside the rad i need to power the water injection

Car is a rs2

Thanks

[S2central.net]

OK... 2 ticks then

[S2central.net]

T8e pin 5 - should be left of the two cylindrical connectors on bulkhead. Look for black wire - this is protected by Fuse 32 (20A) - only active with ignition ON.

[S2central.net]

or T8e pin 2 - black/blue thru Fuse 12

[S2central.net]

T8e pin 2 conveniently tracks to the +ve (PIN 3) terminal of the good ol MFTS - very close to radiator. Its black/blue.

Does that help ?

[jade]

T8e pin 2 conveniently tracks to the +ve (PIN 3) terminal of the good ol MFTS - very close to radiator. Its black/blue.

Does that help ?

Unfortunately no access to mfts or the cables now, I suppose it would need to be from the fuse box now

Thanks Wayne

[S2central.net]

Then just splice into the 'south side' of Fuse 32 or 12.

Question though - does that water injection controller have intelligence ? I mean it only sprays when throttle position or boost is above certain level - right ?

[jade]

Then just splice into the 'south side' of Fuse 32 or 12.

Question though - does that water injection controller have intelligence ? I mean it only sprays when throttle position or boost is above certain level - right ?

At the moment just boost pressure, but i am thinking of using the ZT-2 to control it once i get ever thing running right

Regards Wayne