Little update at S2central.net tonight

[S2central.net]

Finally got to link some more PDF resources into my schematics area... Bit of tidying required but lots of quality raw info from zee factory.

http://www.s2central.net/S2_Schematics/

[Flat on my back]

.

I lurv you...errrrrr...in a manly techno sort of way...

[macspring]

Paul,

Wow that's impressive !

Thank you very much.

Kind regards.

[Bram]

Good stuff! Thanks

[S2central.net]

Updated again with 3B engine locations and a cleaned up view of interior component locations across Coupe, Avant & Limo...

http://www.s2central.net/S2_Schematics/

[Le S2 Audi]

Updated again with 3B engine locations and a cleaned up view of interior component locations across Coupe, Avant & Limo...

http://www.s2central.net/S2_Schematics/

[4WheelDrifter]

Good work Paul.
These schematics have really saved me with my project.

What's up with the MY91-3B-C section being blank? Seeing as MY91s are the most common, and quite different to MY92s in some regards.

[S2central.net]

Stu - I do have the 91 engine schematics and some other 3B bits for 1991... I'll do best to upload this week... Nearly everything else for a 91 refers to the 1990 schematic binder - which will be the 6th one I have to buy at a hunderd and something Eurios. Pheck...

you are also right to say there are some oddballs on a 91 too - well that or loads more mistakes on the drawings

[4WheelDrifter]

I like to think it's the '92 cars that are oddballs.
I still find quite a bit in the cq Bentley manual useful for the old '91 3B.

I was trying to figure out which 2 pin connector went to the Servotronic solenoid the other day. A quick look on s2central, and there it is.

[S2central.net]

OK - Placeholder online now for 1991 3B and I have the engine schematics uploaded for starters... I had forgotten just how boring it is to compile all those PDFs, spreadsheets and docs for each year and variant. My head is not quite into it, but I'll try to chip away at it and complete the set...

http://www.s2central.net/S2_Schematics/

[Le S2 Audi]

I had forgotten just how boring it is to compile all those PDFs, spreadsheets and docs for each year and variant. My head is not quite into it, but I'll try to chip away at it and complete the set...

http://www.s2central.net/S2_Schematics/

You love doing it REALLY!!!!

[S2central.net]

If I say that enough times, I might start believin it, but no it really is dull... Though admittedly the end result is rather pleasing.

[S2central.net]

Tickled the 1991 3B again... I need the 1990 binder to complete the set. Meantime I suppose I'll have to finish off late avant/limos and the RS2.

Other idea I had was to capture other 'interesting engines' from other B3/B4 models. Some suggestions in no particular order -

3A (4cyl 2liter 8V)
6A (4cyl 2liter 16V)
KV (5cyl 2226 10V)
NG (5cyl 2309 10V)
NM (5cyl 2liter 20V)
7A (5cyl 2309 20V)
AAH (6cyl 2.6 12V)
and the AAN from the other family of course

Any other notable engines of interest - other than URs ? I can link to kerbside motors for schematics from those - no need to go thru that pain myself.

[mcandmar]

Funny i was going to PM you about that, any chance you can dig out the relevant ECU and Fusebox pages for a 7A?

Cheers,

Mark.

[S2central.net]

Made a start on this... very dull, but result should have wide appeal... Took a notion of 'notable petrol engines' as having 100kW or more. Got them all for 1991 so far. Rest will follow...

http://www.s2central.net/S2_Schematics/