Rear light problem ....

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Tuna
    S2Forum Fanatic
    • Jun 2008
    • 80
    • Country: Sweden

    #1

    Rear light problem ....

    Hi.

    I can not get my rear lights to work correctly. Before I do anything more I have to assure me that I connected everything right.

    The large contact is difficult to put in the wrong place but the small are a bit tricky ? there are a couple of "sticks" to choose from ? can someone show me the correct connections for the left and right side ?

    regards
    Johan
  • bikerjim
    S2Forum Extremist
    • Feb 2008
    • 1028
    • Country: United Kingdom

    #2
    I recently had a problem with my rear tail lights. The connectors were badly corroded. I took the backs off and cleaned the terminals as much as i could but i was still getting a cross feed with indicators and side lights etc. So i wired in my own earth to each light and they work great now.

    Comment

    • Tuna
      S2Forum Fanatic
      • Jun 2008
      • 80
      • Country: Sweden

      #3
      thanks for the tip

      Hi.

      OK, thanks for the tip, maybe I should do so to but first I want to be insured that they are connected correctly.

      Would be much appreciated if any one could take a photo of each side
      so I can see how the cables are connected.

      Thanks
      Johan

      Comment

      Working...