1.8T Ignition Coil Loom

[Masterblaster]

Hi,

i need the part numbers of the Ignition loom connectors like the ones used on the apikol loom.
Thx
Kai

[UrS4boy]

Hi, i need the part numbers of the Ignition loom connectors like the ones used on the apikol loom. Thx Kai

Which ones? The four pins to the coils? The 3 pin power connectors? The four pin to the ECU POS connectors? All of them?

Have you seen the original instructions (that I did back in Oct. 2005, before Apikol's kit came out in April 2006)?
http://www.s-cars.org/postnuke/downl...structions.pdf

There were some updates, mostly the 4 pin connectors to the ECU harness are Volvo connectors (also Bosch: 1 928 402 373) and the three pin power connectors are available as Audi Parts:

[Masterblaster]

Hi

japp just found it.
Thumbs up for the nice work

[UrS4boy]

Hi japp just found it.
Thumbs up for the nice work

Check my previous post above. I've added the PN for the proper 3 pin power connector. Check with your connector supplier regarding the proper male pins and grommets for these connectors.