got a 1.8t in and all running nicely in my 90q and i need to wire the:
rev counter
coolant temp
oil pressure
maybe a few more but there the important ones, the problem i am having is that the temp gauge never worked and this was due to burnt out wiring which ive traced back to the bulkhead and removed it, however this was a while ago so have no idea what goes where lol at the minute the complete kv engine harness is still in there(apart from the few burnt wires that were removed)
does the harness need power? theres a thick red wire so im assuming that should be 12v
can anyone tell me what colour the wires are for the 3 things mentioned above? i'm pretty sure s2 and 90 will use the same colours
rev counter
coolant temp
oil pressure
maybe a few more but there the important ones, the problem i am having is that the temp gauge never worked and this was due to burnt out wiring which ive traced back to the bulkhead and removed it, however this was a while ago so have no idea what goes where lol at the minute the complete kv engine harness is still in there(apart from the few burnt wires that were removed)
does the harness need power? theres a thick red wire so im assuming that should be 12v
can anyone tell me what colour the wires are for the 3 things mentioned above? i'm pretty sure s2 and 90 will use the same colours
its in a b3 and i used an aeb. can't wait to get the thing on the road
Comment