Multi Function Temp Switch.

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Bosscat
    replied
    MTF Problem.

    Huuum - Bought plug and wires from audi dealer - big wires ??

    Having trouble with the BLUE / YELLOW & BLUE GREEN in diagram.

    I have a BLUE-YELLOW/WHITE stripe sort of wire ??? Not to mention that YELLOW and GREEN becone a bit same-ish after 18 years approx.

    Anyone come accross this problem !!!!!coocoo:

    Martin.

    Leave a comment:


  • UrS4boy
    replied
    Originally posted by Bosscat
    Trying to double check the wiring to the MTF on the water manifold on an /aby avant. First - 4 connectors attaching into a 3 pin switch - ?? (new switch).Next thing is the colour identification of the wires to each connector ?? -After twenty years these are not the brightest on the planet.
    I know you got your answer but if I had woken earlier (I am 9 hrs behind you and slept in), I would have given you this:

    Leave a comment:


  • Bosscat
    replied
    MTF Problem.

    Mutchas Gracias ye ALL.

    Bosscat.

    Leave a comment:


  • newsh
    replied
    Click on this LINKY!

    Leave a comment:


  • Bosscat
    replied
    MTF wiring

    Thanks Ross.


    I must be dumb or something - could not locate this thread on the search !!!

    I assume for us electrical apprentices - BR/BL means predom Brown with black stripe.

    Really could do with a cut off plug with wires still intack - tall order though!!

    Mutchas Gracias.

    Martin.

    Leave a comment:


  • Ross
    replied
    I think you'll find all the info you need in my thread:



    Tell me about the access, i was able to get a little more length on the wire by threading the spur with the MTFS thread back behind a breather pipe and moved the hydraulic lines a bit. Cutting off the old plug, and fitting a new one with a few inches of loom 'extension' attached seems like the best way to go.

    Leave a comment:


  • Bosscat
    started a topic Multi Function Temp Switch.

    Multi Function Temp Switch.

    Trying to double check the wiring to the MTF on the water manifold on an /aby avant.

    First - 4 connectors attaching into a 3 pin switch - ?? (new switch)

    Next thing is the colour identification of the wires to each connector ?? -After twenty years these are not the brightest on the planet.

    Also there is the access - its NOT an easy place to live - loom wires are quite short !! - Think I might need to remove the radiator to get better access.

    Any one got any experience of this job.

    Martin.
Working...